Steeda Competition Front Sway Bar - 05-14 Mustang
Steeda's 1 3/8 inch diameter competition front swaybar evolved from our original adjustable front swaybar and gives you an added level of control over our original adjustable swaybar.
Designed and manufactured exclusively by Steeda in the USA to the highest possible standards, Steeda Front Swaybars withstand the rigors of high performance racing whole providing the performance and handling benefits you want without degrading ride quality for street use.
Like the original this bar features 3 adjustment positions for fine tuning of handling balance. This bar provides an additional 17% increase in roll stiffness over our original adjustable front swaybar. This calculates to a 102% increase in front roll stiffness over a 2005-2010 V6 factory swaybar, and a 27% increase in front roll stiffness compared to the factory GT and GT500 front swaybar.
Steeda's swaybars feature our unique and patented welded billet ends instead stamping the ends like competitive designs. Most swaybars available today are made from a solid round bar whose ends are smashed flat and drilled for mounting holes. Our welded end connection is far stronger than stamping the end of the bar. Combined with billet machined construction for the swaybar ends makes for far greater strength for a practically bulletproof swaybar.
Looking for the ultimate competition level handling combination? Use this swaybar with Steeda's 555-1071 rear swaybar for competition level handling.
- Billet welded ends for ultimate strength!
- 3 position adjustment for fine tuning of handling balance
- Direct bolt on replacement!
- Competition tested and proven!